Formula and units
Wet paste mass = target volume × wet paste density. Dry solids = paste mass × solids fraction. Binder = dry solids × binder fraction; dry tailings = dry solids − binder. Total mix water = paste mass − dry solids. This is a mass balance, not a mix-design model.
Worked example
For 100 m³ at 2.0 t/m³, 75% solids and 5% binder of dry solids: paste mass 200 t, dry solids 150 t, binder 7.5 t, dry tailings 142.5 t and total water 50 t.
Assumptions and limits
Use the approved wet density and mix percentages for the site. The calculated water is total water; subtract water already in wet tailings separately. Tailings chemistry, grading, binder type, mixing energy, transport and curing affect performance. Lab and site trials are required for strength and pumpability. Reference: https://www.mdpi.com/2075-163X/11/11/1159