Roof Pitch: Calculate Rise, Run, Slope and Angle

All tools: Construction & Civil Engineering

Convert roof rise and horizontal run into slope percentage, pitch ratio and angle without mixing units.

Open the free tool →

Formula and units

Slope (%) = rise ÷ horizontal run × 100. Angle = arctan(rise ÷ run). In the common inches-per-foot convention, pitch = rise in inches per 12 inches of horizontal run. Use horizontal run, not rafter length.

Worked example

A roof rising 6 inches over 12 inches of horizontal run has a 6:12 pitch, 50% slope and an angle of about 26.6°.

Assumptions and limits

Measure the horizontal projection and keep rise and run in the same units. Roof geometry, overhangs and local definitions can differ. Pitch alone does not establish structural capacity, drainage compliance or fall protection needs.