Formula and units
Net wall area = total wall area − openings. Blocks before allowance = net area ÷ block face area. Add the selected waste allowance and round up to whole blocks. Use nominal dimensions consistently; mortar joints affect actual layout.
Worked example
A 10 m² wall with 0.40 × 0.20 m block faces needs 10 ÷ 0.08 = 125 blocks before allowance. A 5% allowance gives 131.25, so order at least 132, subject to pack sizes and cuts.
Assumptions and limits
This is a quantity estimate, not a structural design. Bond pattern, corners, lintels, openings, breakage and local block dimensions change the count. Confirm the layout and structural requirements with the drawings and supplier.